Daily Archives: May 3, 2017

Developments in the structural science of materials

C. Richard A. Catlow, Main Editor, IUCrJ

The papers published during the last year in IUCrJ in the fields of materials and computational science illustrate well the challenges posed by structural problems in the science of materials and the key role that computation can play in this and related fields in structural science. As in previous years, they demonstrate the continuing developments in techniques and instrumentation and the increasingly complex structural problems which these developments now make accessible; the role of computation in interpreting and predicting structures is equally clear.

An excellent example of technical developments facilitating new structural science is provided by the article of [Meng, Y. & Zuo, J.-M. (2016). IUCrJ, 3, 300-308], which probes three-dimensional nano-structures using a technique that employs high-resolution and low-dose scanning electron nano-diffraction (SEND) to acquire three-dimensional diffraction patterns. Their work investigates TiN – a material that is widely used in the electronics industry – and Fig. 1 illustrates how they were able to reconstruct grain structures within the material. Detailed knowledge of this microstructure is essential in understanding and optimizing the properties of the material.

Figure 1. Reconstructed grains and their orientations. Meng, Y. & Zuo, J.-M. (2016). IUCrJ, 3, 300-308

Previous editorials have emphasized the key role of diffuse scattering, which is also facilitated by technical advances. The importance of the field in materials science is well illustrated by the article of [Sawa, H. (2016). IUCrJ, 3, 298-299], which highlights the work of [Welberry, T. R. & Goossens, D. J. (2016). IUCrJ, 3, 309-318] on the interpretation of diffuse scattering from the high-temperature superconductor, HgBa2CuO4 + δ. Analysis of the diffuse scattering data reveals fascinating features involving the displacement of metal atoms around oxygen interstitial chains. This article along with several others demonstrates the need to elucidate complex structural features in disordered materials.

Analysis of diffuse scattering is also vital in the particularly exciting challenge of developing detailed models for the atomic arrangements in quasicrystals. The article of [Ishimasa, T. (2016). IUCrJ, 3, 230-231] highlights the study of [Yamada, T., Takakura, H., Euchner, H., Pay Gómez, C., Bosak, A., Fertey, P. & de Boissieu, M. (2016). IUCrJ, 3, 247-258] on the atomic structure and phason modes of the Sc–Zn icosahedral quasicrystal, which employs synchrotron-based diffraction and diffuse scattering to investigate this difficult problem.

Figure 2. A polyhedral representation of the denisovite structure. Rozhdestvenskaya, I. V., Mugnaioli, E., Schowalter, M., Schmidt, M. U., Czank, M., Depmeier, W. & Rosenauer, A. (2017). IUCrJ, 4, XXX-XXX.

The complexity of structural problem that can now be addressed is well illustrated in the paper of [Rozhdestvenskaya, I. V., Mugnaioli, E., Schowalter, M., Schmidt, M. U., Czank, M., Depmeier, W. & Rosenauer, A. (2017). IUCrJ, 4, XXX-XXX], who use a wide range of techniques including several electron crystallographic methods, XRPD and modelling to solve the structure of denisovite, a highly complex, fibrous, polytypical silicate. The structure revealed is shown in Fig. 2. The article is an elegant illustration of the capacity of, and the need for, a multi-technique approach in addressing structural problems in materials science.

A further example of complex structural science is given by the study of SnTe reported by [Sist, M., Jensen Hedegaard, E. M., Christensen, S., Bindzus, N., Fischer, K. F. F., Kasai, H., Sugimoto, K. & Brummerstedt Iversen, B. (2016). IUCrJ, 3, 377-388]. This material is increasingly investigated owing to its potential as a thermoelectric material and as a topological insulator. Their study again reveals the importance of disorder and emphasizes the need to include the effects of disorder in any theoretical investigation of the material.

Several papers illustrate both the growing power of computational methods in structural science and the role of new methodologies and algorithms in investigating structural problems [Genoni, A., Dos Santos, L. H. R., Meyer, B. & Macchi, P. (2017). IUCrJ, 4, 136-146] explore the concept of X-ray-constrained Hartree–Fock wavefunctions (XC–WF) and discuss how the procedure can be used to extract correlation effects. Their careful analysis demonstrates that the single determinant XC–WF only partially captures the effects of correlation. The paper of [Wall, M. E. (2016). IUCrJ, 3, 237-246] on quantum crystallography and the charge density of urea shows, as the authors comment, the benefits and feasibility of integrating fully periodic quantum charge-density calculations into ultra-high-resolution X-ray crystallographic model building and refinement. While the value of force-field-based methods is illustrated by the paper of [Li, X., Neumann, M. A. & van de Streek, J. (2017). IUCrJ, 4, 175-184], who evaluate different force fields in the context of their use in dynamical simulations for the prediction of chemical shifts in solid-state NMR.

The importance of the structural science of materials is, of course, illustrated by many other articles published in other journals. Of particular interest is the way in which multi-technique approaches are pinning down key structural features of catalytic materials under real operating conditions. We have previously highlighted the work of [Lezcano-Gonzalez, I., Oord, R., Rovezzi, M., Glatzel, P., Botchway, S. W., Weckhuysen, B. M. & Beale A. M. (2016) Angew. Chem. Int. Ed., 55, 5215-5219], which combines high-resolution fluorescence-detection X-ray absorption near-edge spectroscopy, X-ray diffraction and X-ray emission spectroscopy under operando conditions to provide detailed new insights into the nature of the Mo species on zeolite ZSM-5 during methane de­hydro­aromatization. Another recent example is the work of [Malta, G., Kondrat, S. A., Freakley, S. J., Davies, C. J., Lu, L., Dawson, S., Thetford, A., Gibson, E. K., Morgan, D. J., Jones, W., Wells, P. P., Johnston, P., Catlow, C. R. A., Kiely, C. J. & Hutchings, G. J. (2017). Science, 355, 1399-1403], who combined XAFS and modelling to show that in an industrially important acetyl­ene hydro­chlorination catalyst, comprising gold on a carbon support, the active sites are not, as previously thought, gold nano-clusters but single gold ions. Catalysis will unquestionably continue to pose fascinating problems for structural science.

It is hoped that this brief survey gives an impression of the range and excitement of the field of the contemporary structural science of materials and the way in which this can be unravelled by a multi-technique approach using experiment and computation. IUCrJ continues to welcome submissions in this growing field.